24.301.451 FINAL INSPECTION
(1) The permittee of record, whether an electrical contractor or a homeowner, shall notify the area electrical inspector when the electrical installation is ready for final inspection and provide access to the installation for inspection or furnish the necessary information as to who can provide access to the installation.
(2) Upon completing final inspections, state inspectors will date and sign the inspection reports. Inspectors will apply a green "approved" tag when installations have been inspected and approved by the department. Upon approval, the department will remove the provisional power designation.
(3) If the installation is disapproved, inspectors will provide the permittee with notice of and reasons for the disapproval. After correcting the cause for disapproval, the permittee must make a request for reinspection to the department. Failure to make corrections or request the final reinspection may cause the department to cancel the provisional power. When the inspector approves the corrected installation as identified on the permit and inspection documents, the inspector will apply the proper final inspection tag to the installation and the department will remove the "provisional power" designation.
History: 50-60-203, 50-60-603, MCA; IMP, 50-60-103, 50-60-201, 50-60-203, 50-60-603, 50-60-604, MCA; NEW, 1978 MAR p. 378, Eff. 2/25/78; AMD, 1979 MAR p. 1665, Eff. 12/28/79; AMD, 1981 MAR p. 519, Eff. 5/29/81; TRANS, from Dept. of Admin., Ch. 352, L. 1985, Eff. 7/1/85; AMD, 1996 MAR p. 420, Eff. 2/9/96; TRANS, from Commerce, 2001 MAR p. 2301; AMD, 2006 MAR p. 567, Eff. 2/24/06; AMD, 2010 MAR p. 1733, Eff. 7/30/10; AMD, 2022 MAR p. 911, Eff. 6/11/22.