HOME    SEARCH    ABOUT US    CONTACT US    HELP   
           
Rule: 17.24.201 Prev     Up     Next    
Rule Title: APPLICABILITY
Add to My Favorites
Add to Favorites
Department: ENVIRONMENTAL QUALITY
Chapter: RECLAMATION
Subchapter: Rules and Regulations Governing the Opencut Mining Act
 
Latest version of the adopted rule presented in Administrative Rules of Montana (ARM):

Printer Friendly Version

17.24.201    APPLICABILITY

(1) This subchapter applies to opencut operations as provided in the Opencut Mining Act (Title 82, chapter 4, part 4, MCA, hereinafter referred to as "the Act").

(2) An operator conducting opencut operations must comply with the provisions of a contract or permit issued under the Act and this subchapter. Except as provided in (5), a permit is required before an operator commences the following:

(a) an opencut operation that results in the removal of more than 10,000 cubic yards of materials and overburden;

(b) more than one opencut operation where each operation results in the removal of less than 10,000 cubic yards of materials and overburden, but the several operations result in the removal of a total of 10,000 cubic yards or more of materials and overburden; or

(c) an opencut operation where overburden and materials are removed from a previously mined site and the amount mined, combined with the amount of previously removed materials and overburden, exceeds 10,000 cubic yards.

(3) Contracts and permits in effect before March 19, 2016, need not be amended to comply with rules and rule amendments adopted on March 19, 2016. Applications for permits, permit amendments, and permit assignments that the department determined to be complete prior to March 19, 2016, remain subject to provisions of this subchapter relating to application requirements as they read on the date the department determined the application to be complete.

(4) Except as provided in (5) and ARM 17.24.226, a permit amendment is required before taking an action that expands or changes a permitted opencut operation.

(5) Except as provided in ARM 17.24.226(5), an operator holding a permit issued under the Act may commence a limited opencut operation that meets the criteria in ARM 17.24.226 and 82-4-431, MCA, after the operator has submitted the limited opencut operation form to the department. 

History: 82-4-422, MCA; IMP, 82-4-431, MCA; NEW, Eff. 9/5/73; AMD, Eff. 11/4/74; AMD, 1994 MAR p. 1871, Eff. 7/8/94; TRANS, from DSL, 1996 MAR p. 2852; AMD, 2004 MAR p. 317, Eff. 2/13/04; AMD, 2016 MAR p. 513, Eff. 3/19/16.


 

 
MAR Notices Effective From Effective To History Notes
17-376 3/19/2016 Current History: 82-4-422, MCA; IMP, 82-4-431, MCA; NEW, Eff. 9/5/73; AMD, Eff. 11/4/74; AMD, 1994 MAR p. 1871, Eff. 7/8/94; TRANS, from DSL, 1996 MAR p. 2852; AMD, 2004 MAR p. 317, Eff. 2/13/04; AMD, 2016 MAR p. 513, Eff. 3/19/16.
2/13/2004 3/19/2016 History: 82-4-422, MCA; IMP, 82-4-431, MCA; NEW, Eff. 9/5/73; AMD, Eff. 11/4/74; AMD, 1994 MAR p. 1871, Eff. 7/8/94; TRANS, from DSL, 1996 MAR p. 2852; AMD, 2004 MAR p. 317, Eff. 2/13/04.
Home  |   Search  |   About Us  |   Contact Us  |   Help  |   Disclaimer  |   Privacy & Security