    HOME SEARCH ABOUT US CONTACT US HELP    Rule: 10.53.514 Prev     Up     Next Rule Title: MONTANA HIGH SCHOOL MATHEMATICS FUNCTIONS STANDARDS   Add to Favorites Department: EDUCATION Chapter: CONTENT STANDARDS Subchapter: Mathematics Content Standards Latest version of the adopted rule presented in Administrative Rules of Montana (ARM):

 Printer Friendly Version 10.53.514    MONTANA HIGH SCHOOL MATHEMATICS FUNCTIONS STANDARDS(1) Mathematics functions: interpreting functions content standards for high school are: (a) understand that a function from one set (called the domain) to another set (called the range) assigns to each element of the domain exactly one element of the range; if f is a function and x is an element of its domain, then f(x) denotes the output of f corresponding to the input x; and the graph of f is the graph of the equation y = f(x); (b) use function notation, evaluate functions for inputs in their domains, and interpret statements that use function notation in terms of a context; (c) recognize that sequences are functions, sometimes defined recursively, whose domain is a subset of the integers; for example, the Fibonacci sequence is defined recursively by f(0) = f(1) = 1, f(n+1) = f(n) + f(n-1) for n ≥ 1; (d) for a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities and sketch graphs showing key features given a verbal description of the relationship; key features include: intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity;* (e) relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes; for example, if the function h(n) gives the number of person-hours it takes to assemble n engines in a factory, then the positive integers would be an appropriate domain for the function;* (f) calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval and estimate the rate of change from a graph;* (g) graph functions expressed symbolically and show key features of the graph, by hand in simple cases and using technology for more complicated cases;* (i) graph linear and quadratic functions and show intercepts, maxima, and minima; (ii) graph square root, cube root, and piecewise-defined functions, including step functions and absolute value functions; (iii) graph polynomial functions, identifying zeros when suitable factorizations are available, and showing end behavior; (iv) (+) graph rational functions, identifying zeros and asymptotes when suitable factorizations are available and showing end behavior; and (v) graph exponential and logarithmic functions, showing intercepts and end behavior, and trigonometric functions, showing period, midline, and amplitude; (h) write a function defined by an expression in different but equivalent forms to reveal and explain different properties of the function; (i) use the process of factoring and completing the square in a quadratic function to show zeros, extreme values, and symmetry of the graph and interpret these in terms of a context; and (ii) use the properties of exponents to interpret expressions for exponential functions; for example, identify percent rate of change in functions such as y = (1.02)t, y = (0.97)t, y = (1.01)12t, y = (1.2)t/10 and classify them as representing exponential growth or decay; and (i) compare properties of two functions each represented in a different way (algebraically, graphically, numerically in tables, or by verbal descriptions); for example, given a graph of one quadratic function and an algebraic expression for another, say which has the larger maximum. (2) Mathematics functions: building functions content standards for high school are: (a) write a function that describes a relationship between two quantities;* (i) determine an explicit expression, a recursive process, or steps for calculation from a context; (ii) combine standard function types using arithmetic operations; for example, build a function that models the temperature of a cooling body by adding a constant function to a decaying exponential and relate these functions to the model; and (iii) (+) compose functions; for example, if T(y) is the temperature in the atmosphere as a function of height and h(t) is the height of a weather balloon as a function of time, then T(h(t)) is the temperature at the location of the weather balloon as a function of time; (b) write arithmetic and geometric sequences both recursively and with an explicit formula; use them to model situations from a variety of contexts (e.g., science, history, and culture, including those of the Montana American Indian); and translate between the two forms;* (c) identify the effect on the graph of replacing f(x) by f(x) + k, k f(x), f(kx), and f(x + k) for specific values of k (both positive and negative); find the value of k given the graphs; experiment with cases and illustrate an explanation of the effects on the graph using technology; and include recognizing even and odd functions from their graphs and algebraic expressions for them; (d) find inverse functions; (i) solve an equation of the form f(x) = c for a simple function f that has an inverse and write an expression for the inverse; for example, f(x) =2 x3 or f(x) = (x+1)/(x–1) for x ≠ 1; (ii) (+) verify by composition that one function is the inverse of another; (iii) (+) read values of an inverse function from a graph or a table, given that the function has an inverse; and (iv) (+) produce an invertible function from a noninvertible function by restricting the domain; (e) (+) understand the inverse relationship between exponents and logarithms and use this relationship to solve problems involving logarithms and exponents. (3) Mathematics functions: linear, quadratic, and exponential models content standards for high school are: (a) distinguish between situations that can be modeled with linear functions and with exponential functions; (i) prove that linear functions grow by equal differences over equal intervals and that exponential functions grow by equal factors over equal intervals; (ii) recognize situations in which one quantity changes at a constant rate per unit interval relative to another; and (iii) recognize situations in which a quantity grows or decays by a constant percent rate per unit interval relative to another; (b) construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two input-output pairs (include reading these from a table); (c) observe using graphs and tables that a quantity increasing exponentially eventually exceeds a quantity increasing linearly, quadratically, or (more generally) as a polynomial function; (d) for exponential models, express as a logarithm the solution to abct = d where a, c, and d are numbers and the base b is 2, 10, or e and evaluate the logarithm using technology; and (e) interpret the parameters in a linear or exponential function in terms of a context. (4) Mathematics functions: trigonometric functions content standards for high school are: (a) understand radian measure of an angle as the length of the arc on the unit circle subtended by the angle; (b) explain how the unit circle in the coordinate plane enables the extension of trigonometric functions to all real numbers, interpreted as radian measures of angles traversed counterclockwise around the unit circle; (c) (+) use special triangles to determine geometrically the values of sine, cosine, tangent for π/3, π/4 and π/6 and use the unit circle to express the values of sine, cosines, and tangent for x, π + x, and 2π – x in terms of their values for x, where x is any real number; (d) (+) use the unit circle to explain symmetry (odd and even) and periodicity of trigonometric functions; (e) choose trigonometric functions to model periodic phenomena from a variety of contexts (e.g. science, history, and culture, including those of the Montana American Indian) with specified amplitude, frequency, and midline;* (f) (+) understand that restricting a trigonometric function to a domain on which it is always increasing or always decreasing allows its inverse to be constructed; (g) (+) use inverse functions to solve trigonometric equations that arise in modeling contexts; evaluate the solutions using technology; and interpret them in terms of the context;* (h) prove the Pythagorean identity sin2(θ) + cos2(θ) = 1 and use it to calculate trigonometric ratios; and (i) (+) prove the addition and subtraction formulas for sine, cosine, and tangent and use them to solve problems.History: 20-2-114, MCA; IMP, 20-2-121, 20-3-106, 20-7-101, MCA; NEW, 2011 MAR p. 2522, Eff. 11/26/11.

MAR Notices Effective From Effective To History Notes
10-53-257 11/26/2011 Current History: 20-2-114, MCA; IMP, 20-2-121, 20-3-106, 20-7-101, MCA; NEW, 2011 MAR p. 2522, Eff. 11/26/11.
Home  |   Search  |   About Us  |   Contact Us  |   Help  |   Disclaimer  |   Privacy & Security  