(1) Referenced standards are available for
inspection at the Department of Justice Fire Prevention and Investigation
Bureau, Scott Hart Building, the Montana Department of Environmental Quality,
Metcalf Building, Helena, Montana, and from the following sources:
(a) American Petroleum Institute (API) , 1220 L
Street NW, Washington, DC 20037, (202)682-8372;
(b) National Association of Corrosion Engineers
(NACE) , 1440 South Creek Drive, PO Box 218340, Houston, TX 77218,
(713)492-0525;
(c) National Fire Protection Association (NFPA) , 1
Batterymarch Park, Quincey, MA 02269, (800)344-3555;
(d) Steel Tank Institute (STI) , 570 Oakwood Road,
Lake Zurich, IL 60047, (708)438-8265;
(e) Underwriters Laboratories (UL) , 333 Pfingsten
Road, Northbrook, IL 60062, (708)272-8800;
(f) Western Fire Chiefs Association (WFCA) , 5360
South Workman Mill Road, Whittier, CA 90601, (301)699-0124;
(g) petroleum equipment institute (PEI) , PO Box
2380, Tulsa, OK 74101-2380, (918)494-9696; and
(h) International Conference of Building Officials
(ICBO) , 5360 South Workman Mill Road, Whittier, CA 90601, (301)699-0541.
(2) For purposes of this chapter, the department
hereby adopts and incorporates by reference each of the following:
(a) The following published by the American
petroleum institute:
(i) Specification No. 12B, "Specification for Bolted Tanks for Storage
of Production Liquids" 1977, 12th edition, as supplemented January, 1982;
(ii) Specification No. 12D, 1982, as supplemented in 1985,
"Specification for Field Welded Tanks for Storage of Production
Liquids", ninth edition;
(iii) Specification No. 12F, 1982 as supplemented
in 1988, "Specification for Shop Welded Tanks for Storage of Production
Liquids", tenth edition;
(iv) Specification No. 12P, September 1, 1986, "Specification for
Fiberglass Reinforced Plastic Tanks", first edition;
(v) Standard No. 620, 1985, "Recommended Rules for Design and
Construction of Large Welded Low-Pressure Storage Tanks", eighth edition;
(vi) Standard No. 650, 1988, "Welded Steel Tanks for Oil Storage",
eighth edition;
(vii) RP 651, (Draft-October 1990) , "Cathodic
Protection of Aboveground Petroleum Storage Tanks";
(viii) RP 652,
(Draft-October 1990) , "Lining of Aboveground Petroleum Storage
Tanks";
(ix) Standard No. 653, (Draft-October 1990) , "Tank
Inspection, Repair, Alteration
and Reconstruction", first edition;
(x) Publication No. 1110, 1981, "Recommended Practice for the Pressure
Testing of Liquid Petroleum Pipelines";
(xi) RP
1615, 1987, "Installation of Underground Petroleum Storage Systems";
(xii) RP 1632, 1987, as supplemented in March 6,
1989, "Cathodic Protection of Underground Petroleum Storage Tanks and
Piping Systems"; and
(xiii) RP 2350,
March, 1987, "Overfill Protection for Petroleum Storage Tanks".
(b) The following published by the national
association of corrosion engineers:
(i) Standard No. RP-0169-83 "Control of
External Corrosion on Underground or Submerged Metallic Piping Systems"
(1983) ; and
(ii) Standard No. RP-0285-95 "Control of
External Corrosion on Metallic Buried, Partially Buried, or Submerged Liquid
Storage Systems" (1985) .
(c) The national fire protection
association's: Standard No. 31,
"Installation of Oil-Burning Equipment", 1987 edition.
(d) The steel tank institute's R892-89, "Recommended
Practice for Corrosion Protection of Underground Piping Networks Associated
with Liquid Storage and Dispensing Systems".
(e) The following published by underwriters
laboratories:
(i) Specification 142 "Steel Aboveground
Tanks for Flammable and Combustible Liquids", 7th edition (April 1, 1993) ;
(ii) Standard 567, "Pipe Connectors for
Flammable, Combustible and LP Gas";
(iii) UL Subject
971, "UL Listed Non-metal Pipe"; and
(iv) UL 2085, 1994, "Insulated Aboveground
Tanks for Flammable and Combustible Liquid".
(f) Uniform Fire Code (UFC) , the most recent
edition adopted by the fire prevention and investigation bureau.
(g) The petroleum equipment institute's standard
RP200-92, "Recommended Practice for the Installation of Aboveground
Storage Systems for Motor Vehicle Fueling".
(h) Uniform Mechanical Code, the most recent
edition adopted by the department of commerce, building codes bureau.
(3) The documents incorporated by reference in (2) above may be obtained at the Department of Justice Fire Prevention and
Investigation Bureau, Scott Hart Building, and the Montana Department of
Environmental Quality, PO Box 200901, Helena, MT 59620-0901.