(1) For purposes of this subchapter, the department adopts and incorporates by reference:

(a) Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, EPA publication SW‐846, Third Edition, Final Updates I (1993), II (1995), IIA (1994), IIB (1995), III (1997), IIIA (1999), IIIB (2005), IV (2008), and V (2015), which may be obtained at https://www.epa.gov/hw-sw846/sw-846-compendium or by contacting the National Technical Information Service, 5301 Shawnee Road, Alexandria, VA 22312 or 1 (800) 553-687;

(b) Montana Risk-based Corrective Action Guidance for Petroleum Releases, (September 2016) as the analytical methodology landfarms must utilize and Table 1 of the Montana Risk-based Corrective Action Guidance for Petroleum Release as the standards for compliance with remediation requirements outlined in ARM 17.50.1617. A copy of the Montana Risk-based Corrective Action Guidance for Petroleum Releases, (September 2016) may be obtained at http://deq.mt.gov/Land/lust or by contacting MDEQ at P.O. Box 200901, Helena, MT 59620-0901 or 1 (406) 444-6435.

(2) For purposes of this subchapter, the following analytical methods, which are contained in the document referenced in (1) must be used:

(a) arsenic concentrations "Method 7061, Test Methods for Evaluating Solid Waste Physical/Chemical Methods (SW-846)";

(b) barium concentrations "Method 6010, Test Methods for Evaluating Solid Waste Physical/Chemical Methods (SW-846)";

(c) benzene, toluene, ethylbenzene, and xylene (BTEX), naphthalene, MTBE, and Lead Scavengers 1, 2 DCA and EDB concentrations "Method 8021 or 8260, Test Methods for Evaluating Solid Waste Physical/Chemical Methods (SW-846)";

(d) cadmium concentrations "Method 6010, Test Methods for Evaluating Solid Waste Physical/Chemical Methods (SW-846)";

(e) chromium concentrations "Method 6010, Test Methods for Evaluating Solid Waste Physical/Chemical Methods (SW-846)";

(f) extractable petroleum hydrocarbon (EPH) concentrations Montana modified "Method for Determination of Extractable Petroleum Hydrocarbons, Massachusetts Department of Environmental Protection";

(g) lead concentrations "Method 7421, Test Methods for Evaluating Solid Waste Physical/Chemical Methods (SW-846)";

(h) mercury concentrations "Method 7421, Test Methods for Evaluating Solid Waste Physical/Chemical Methods (SW-846)";

(i) paint filter liquids test "Method 9095B, Test Methods for Evaluating Solid Waste Physical/Chemical Methods (SW-846)";

(j) selenium concentrations "Method 7741, Test Methods for Evaluating Solid Waste Physical/Chemical Methods (SW-846)";

(k) silver concentrations "Method 7761, Test Methods for Evaluating Solid Waste Physical/Chemical Methods (SW-846)";

(l) total petroleum hydrocarbon (TPH) concentrations "Method 8015, Test Methods for Evaluating Solid Waste Physical/Chemical Methods (SW-846)";

(m) volatile petroleum hydrocarbon (VPH) concentrations Montana modified "Method for Determination of Volatile Petroleum Hydrocarbons, Massachusetts Department of Environmental Protection"; and

(n) any other analytical method approved by the department.